The following systems are available.
Supercritical hydrothermal treatment system in a continuous flow
MOMI-cho®mini
Maximum pressure 30MPa, maximum temperature (before mixing) 450℃, water feeding rate 10ml/min
By mixing an aqueous metal salt solution with high-temperature water, fine particles can be synthesized by hydrolysis and dehydration.
In addition, it is possible to modify the organic group on the surface by adding a slurry of particles.
Although it depends on the feeding rate of the raw material, a typical production amount is about 2 to 3 g / Hr.
Batch reactors
Maximum pressure 30MPa, maximum temperature 400℃, volume 50ml(φ19). Pressure control is possible.
High pressure slurry pump
Slurries and high viscosity liquids cannot be fed with a plunger pump. In that case, this device is required, where a stirrer is used to prevent the slurry from settling. There is a single cylinder type (right photo: 30MPa, 10ml / min) and a double cylinder type (30MPa, 100ml / min) that can send liquid without interruption. Also, when feeding biomass or magnetic particles, a forced stirring method is required. In that case, please contact us.
